⚙️ RECIPROCATING PISTON | GASOLINE ENGINE | PORTABLE 2-WHEEL HAND TRUCK STYLE

6.5HP Gasoline Powered Piston Air Compressor | 20 Gal Single Tank

Heavy‑duty cast iron pump, portable two‑wheel hand‑truck design, ideal for job sites, remote locations, and outdoor applications without electrical access. Powered by a reliable 6.5HP OHV gasoline engine.

Engine Power: 6.5 HP – OHV 4‑stroke, recoil start

Fuel Tank Capacity: 0.95 gal (3.6 L) – gasoline

Max Working Pressure: 115 psi (8 bar)

Free Air Delivery (FAD): 18 CFM @ 115 psi

Tank Capacity: 20 Gallons

Pump Type: Cast iron, single‑stage, oil‑lubricated

Noise Level: 88 dB(A) @ 1m (with muffler)

Wheels: Two heavy‑duty pneumatic wheels (10" diameter) + folding kickstand

Dimensions (L×W×H): 44" × 16" × 35"

Weight: 240 lbs (dry, no fuel)

Outlet Size: 1/4" NPT (quick connect couplers included)

🔧 Parameters measured at reference conditions (ambient 20°C, 1 bar). Actual CFM may vary with altitude & humidity. Gasoline engine output derates at high altitude.

📷 20 gal tank, two‑wheel hand truck frame, recoil start, pneumatic tires, folding stabilizer leg.

✨ Advantages of Gasoline Piston Compressor

💰 Lowest Cost of Entry

No electrical wiring or 3‑phase power required. Perfect for construction sites, farms, and remote locations where grid power is unavailable.

💪 Portable & Self‑Contained

Two‑wheel hand‑truck design allows easy tilting and rolling like a dolly. The 20‑gallon tank provides ample air storage for nail guns, inflators, and impact wrenches – more runtime between cycles than smaller twin‑tank units.

🔧 Simple & Serviceable

Easy to repair with widely available spare parts (rings, valves, gaskets). No special tools required for maintenance.

🏭 Cast Iron Pump Construction

Durable pump with cast iron cylinder and aluminum head for heat dissipation. Designed for years of reliable service on job sites.

⛽ Reliable OHV Engine

6.5HP OHV gasoline engine with low‑oil shutdown, easy recoil start, and fuel shutoff valve. Runs on regular unleaded gasoline.

📐 Detailed Technical Data

Pump Swept Volume: 18 CFM displacement

Engine RPM: 710 RPM

Starter Type: Recoil (manual pull)

Cooling: Air‑cooled (flywheel fan)

Lubrication: Splash lubrication (SAE 30 or 10W‑30 engine oil in crankcase)

Max Duty Cycle: 50‑60% (intermittent – allow cooldown)

Protection: Low oil shutdown (engine)

Intake Filter: Foam air filter (cleanable)

Tank Features: 20‑gal tank, manual drain valve, pressure gauge, safety relief valve

Wheels: Two 10" pneumatic tires on a solid axle, with ball bearings for smooth rolling; folding kickstand for stable parking

🏭 Understanding Gasoline vs. Electric Compressors

Gasoline powered compressors are ideal for job sites without electricity, outdoor work, and temporary applications. They provide independence from power cords but require fuel, produce higher noise (≈88 dB), and need periodic engine maintenance (oil changes, air filter, spark plug). For continuous indoor use, electric compressors are recommended.

⚙️ Maintenance Tips for Long Life

✔️ Change engine oil every 25 hours of use (SAE 10W‑30 or 10W‑40)

✔️ Clean or replace air intake filter every 10 hours

✔️ Drain moisture from tank after each use

✔️ Check and tighten cylinder head bolts periodically

✔️ Use fresh gasoline and add fuel stabilizer if storing long‑term

✔️ Inspect belts for tension and wear every 50 hours

🏗️ Typical Applications (Portable & Off‑Grid)

- Roofing and framing nail guns

- Tire inflation on job sites

- Paint spraying (small to medium projects)

- Pneumatic impact wrenches (light to medium duty)

- Fencing, farm equipment repair

- RV and boat maintenance

- Emergency backup air supply

📦 Standard Inclusions

✔️ 6.5HP OHV gasoline engine (recoil start, low‑oil shutdown)

✔️ Cast iron single‑stage pump

✔️ Belt guard and belt drive

✔️ 20‑gallon ASME certified air tank (pre‑plumbed)

✔️ Pressure switch with unloader valve

✔️ Safety relief valve and pressure gauge

✔️ Two 10" pneumatic wheels (ball bearing hubs)

✔️ Folding kickstand / stabilizer leg

✔️ Ergonomic handle grip for pulling/tilting

✔️ 1/4" NPT quick connect coupler (2 outlets)

✔️ Manual drain valve (tank)

✔️ Tool kit and operator manual

Optional Add-Ons:

- Extended air hose (50 ft)

- Pneumatic tire inflation kit

- Air filter regulator (for painting)

- Spare belt and spark plug

- Wheel chock for sloped surfaces

🛡️ Warranty & Support

✔️ 1‑year limited warranty on compressor pump (cast iron)

✔️ 90‑day warranty on gasoline engine (manufacturer's standard)

✔️ US‑based technical support – phone and email

✔️ Spare parts available online (belts, filters, valves, engine parts)

⚠️ Important Notes:

- This compressor is designed for intermittent duty (not 24/7 continuous operation).

- Always operate in a well‑ventilated area – engine produces carbon monoxide.

- Do not exceed 115 psi operating pressure.

- Use only non‑ethanol gasoline for best performance and storage life.

- Two‑wheel design is stable when parked on level ground using the kickstand. Always engage kickstand before starting.